Material:
PPS needle punched felt
450gsm, 500gsm, 550gsm
Finish Treatment:
Singed, calendered, heat set, water&oil repellent, PTFE membrane
Size: diameter 100mm, 125mm, 130mm, 150mm, 180mm, 250mm ect.
Confirm the required length and custom dimensions with SFFILTECH before quotation.
Process Method: sewing or welded
Advantages:
Temperature limits depend on the supplied construction and operating conditions. Confirm gas chemistry, moisture and exposure duration for the application.
Recommended maximum continuous temperature: 190°C.
Recommended maximum short-term surge temperature: 210°C.
No melting point, yellow color
Filtration area depends on the finished bag design. Review retention requirements, dust loading and cleaning conditions for the selected construction.
Dust collector filter bag:
Since every filter has its own characteristics and parameters,
when we chose filter material for dust collector filter bags,
we have to know the following parameters: temperature, humid,
dust diameter, gas chemical properties, dust abrasive, filter's mechanical parameters.
Generally, SFF dust collector filter bags are widely used in industrial waste gas filtration, useful dust, high temperature gas filters.
Share process conditions and dust characteristics with SFFILTECH for media selection and quotation; confirm performance against an agreed specification.
Technical Data:
Thickness | 1.70mm |
Mean Air Permeability | 10-15 m3/m2/min@12.7mmH2O |
Breaking Strength-MD | 900 N/125px |
Breaking Strength-CMD | 1300 N/125px |
Breaking Elongation(N/125px)-MD | 20% |
Breaking Elongation(N/125px)-CMD | 40% |
Dry Shrinkage MD（130℃） | ＜1.5 % |
Dry Shrinkage CMD（130℃） | ＜1.5 % |
Operating Temperatures | Up to 190°C |
Recommended Maximum Continuous | 190°C |
Recommended Maximum Surge | 210°C (short-term) |
Application:
PPS filter cloth may be considered for industrial dust collection after reviewing temperature, gas chemistry, moisture, oxidation exposure and cleaning conditions for the supplied media.
Contact SFFILTECH with the required weight, finish, dimensions and operating conditions for specification review and quotation.
